The fuel pump flange in your motorcycle is a critical part that connects the fuel pump to the tank. Over time, it can develop small cracks and start leaking fuel.
Risk if Unfixed
If fuel leaks from the pump and meets an ignition source, like a spark or a hot exhaust component, it could catch fire. This could lead to a serious fire, potentially causing a crash or injury.
Free Fix
Your BMW dealer will inspect and repair the fuel pump flange, either by reinforcing it or replacing it if necessary. This repair will be done at no charge to you. You'll get a notification when the repair is ready, and you should schedule it as soon as possible.
Show original NHTSA language
Original — What Happened
BMW of North America, LLC (BMW) is recalling certain model year 2005-2011 model year R-model motorcycles, model year 2005-2012 K-model motorcycles, model year 2010-2011 S 1000 model motorcycles, and model year 2006-2010 HP2 motorcycles. In the affected motorcycles, the fuel pump flange (and the auxiliary fuel pump flange if equipped) could develop cracks and leak fuel.
Original — Risk if Unfixed
A fuel leak in the presence of an ignition source may result in a fire.
Original — Remedy
BMW will notify owners, and dealers will either reinforce the fuel pump flange or replace the pump, as necessary, free of charge. The recall began on April 16, 2014. Owners may contact BMW customer relations at 1-800-525-7417 or email BMW at CustomerRelations@bmwusa.com.
The brake lines in your motorcycle connect the brake master cylinder to your front brakes. In some 2007-2009 R 1200 and K 1200 models, these lines could be damaged by vibrations while riding.
Risk if Unfixed
If the brake lines break, brake fluid could leak out, and your front brakes might fail while you're riding, increasing the risk of a crash.
Free Fix
Your local BMW dealer will replace the brake lines with new ones that have extra protection to prevent damage, free of charge. You should schedule the repair as soon as possible.
Show original NHTSA language
Original — What Happened
BMW IS RECALLING CERTAIN MODEL YEAR 2007 THROUGH 2009 R 1200 AND K 1200 SERIES MOTORCYCLES MANUFACTURED FROM AUGUST 2006 THROUGH MAY 2009. DUE TO THE CURRENT ROUTING OF THE FRONT BRAKE LINES, IT IS POSSIBLE THAT DURING RIDING, AND THEREFORE ASSOCIATED VIBRATION. THE BRAKE LINES COULD BE UNDER STRAIN. IF THE VIBRATION/STRAIN IS SIGNIFICANT, THE BRAKE LINE COULD SPLIT AND START TO DEVELOP A LEAK.
Original — Risk if Unfixed
IF THIS GOES UNNOTICED, AND THE BRAKE FLUID RESERVOIR RUNS EMPTY, THE FRONT BRAKES COULD FAIL, INCREASING THE RISK OF A CRASH.
Original — Remedy
BMW WILL NOTIFY OWNERS AND DEALERS WILL INSTALL NEW BRAKE LINES, CONTAINING A "SLEEVE" ALONG A PORTION OF THE LINES FREE OF CHARGE. THE SAFETY RECALL BEGAN ON SEPTEMBER 20, 2010. OWNERS MAY CONTACT BMW AT 1-800-525-7417.
The rear wheel mounting flange is a crucial part that holds your rear wheel in place on your motorcycle. In certain models, if the bolts that attach it are over-tightened, the flange could crack.
Risk if Unfixed
If the flange cracks, the bolts could loosen, and your rear wheel might come loose while you're riding. This could make your motorcycle unstable and increase the risk of a serious crash.
Free Fix
Your BMW dealer will swap out the aluminum rear wheel flange for a stronger steel one at no cost to you. Schedule the repair as soon as you get the recall notice, and it's completely free.
Show original NHTSA language
Original — What Happened
BMW of North America, LLC (BMW) is recalling certain model year 2005-2010 R1200GS and R1200RT, 2006-2010 R1200GS Adventure, 2007-2010 R1200R, 2007 R1200S and K1200R Sport, 2005-2007 R1200ST, 2008-2009 HP2 Megamoto, 2006 HP2 Enduro, 2008-2010 HP2 Sport, 2005-2008 K1200S, 2006-2008 K1200R, K1200GT, 2009-2011 K1300S, 2010-2011 K1300R, and 2009-2010 K1300GT motorcycles. In the affected motorcycles, the rear wheel mounting flange may crack if the rear wheel mounting bolts are over tightened.
Original — Risk if Unfixed
If the rear wheel mounting flange cracks, the mounting bolts may loosen and the rear wheel may not remain secured to the motorcycle, causing a loss of stability and increasing the risk of a crash.
Original — Remedy
BMW will notify owners, and dealers will replace the existing aluminum rear wheel flange with a steel one, free of charge. The recall began on May 7, 2015. Owners may contact BMW customer service at 1-800-525-7417.
