How many safety recalls does the 2018 BMW 640i have?

The 2018 BMW 640i has 2 known safety recalls on record. All recalls are repaired free of charge at authorized dealerships.

What is the most severe recall for the 2018 BMW 640i?

The most severe recall for the 2018 BMW 640i is classified as critical. This indicates a life-threatening safety issue that should be addressed promptly.

Is the 2018 BMW 640i safe to drive?

The 2018 BMW 640i has 2 open safety recalls. While the vehicle may still be driven, owners should contact an authorized dealership to schedule free repairs for any outstanding recalls. Some recalls, especially those classified as critical or high severity, may pose significant safety risks.

What is the BACK OVER PREVENTION: SENSING SYSTEM: CAMERA recall for the 2018 BMW 640i? (Campaign #19V684000)

The back-up camera system in your vehicle is designed to display a clear view of the area behind your car when you're in reverse. However, in certain models, the camera settings can be adjusted to block this view, and the system won't remember to show it again when you need it. If you can't see the area behind your vehicle, you're more likely to back into something or someone, which could cause a crash and potentially serious injury. Your BMW dealer will update the camera software to ensure the back-up view is always visible when you're in reverse — and this repair is completely free.

2018 BMW 640i

2 recalls Most severe issue: Critical

All recalls are free to repair at your local dealership. Contact your dealer to schedule service.

Component

ENGINE AND ENGINE COOLING:ENGINE

Manufacturer

BMW of North America, LLC

What Happened

The crankshaft sensor in your vehicle is like a messenger that tells the engine how fast it's spinning. In some 2018-2019 BMW models, the sensor might have the wrong instructions, so it can't do its job properly.

Risk if Unfixed

If the sensor fails, your engine could stall while you're driving, which could increase the risk of a crash.

Free Fix

Your BMW dealer will replace the faulty crankshaft sensor with a new one, at no cost to you. When you get the recall notice, schedule the repair as soon as possible.

Show original NHTSA language

Original — What Happened

BMW of North America, LLC (BMW) is recalling certain 2018 BMW 540d xDrive vehicles. The crankshaft sensor may be equipped with incorrect firmware, preventing the sensor from properly processing input from the crankshaft reluctor ring, possibly resulting in a vehicle stall. On September 12, 2018, BMW expanded the recall to a total of 5,309 vehicles including certain 2018-2019 BMW 540d xDrive, 230i M240i, M240i xDrive, X2 sDrive28i, X2 xDrive28i, X1 sDrive28i, X1 xDrive28i, 330i, 330i xDrive, 340i, 340i xDrive, 330i xDrive Gran Turismo, 530i, 530i xDrive, 540i, 540i xDrive, 530e, 530e xDrive, 640i xDrive Gran Turismo, 330e, 2019 430i Gran Coupe, 430i xDrive Gran Coupe, 440i Gran Coupe, 440i xDrive Gran Coupe, 430i, 430i xDrive, 440i, 440i xDrive, 740i, 740i xDrive, MINI Cooper, Cooper S, JCW, MINI Countryman (Cooper, Cooper All4, Cooper S, Cooper S All4, JCW All4), and MINI Clubman (Cooper, Cooper S, Cooper All4, Cooper S All4, JCW All4) vehicles.

Original — Risk if Unfixed

A vehicle stall can increase the risk of a crash.

Original — Remedy

BMW will notify owners, and dealers will replace the crankshaft sensor, free of charge. The recall began September 6, 2018. Owners may contact BMW customer service at 1-800-525-7417.

View full recall details → Repairs are free at any authorized dealer. Find a dealer →

Component

BACK OVER PREVENTION: SENSING SYSTEM: CAMERA

Manufacturer

BMW of North America, LLC

What Happened

The back-up camera system in your vehicle is designed to display a clear view of the area behind your car when you're in reverse. However, in certain models, the camera settings can be adjusted to block this view, and the system won't remember to show it again when you need it.

Risk if Unfixed

If you can't see the area behind your vehicle, you're more likely to back into something or someone, which could cause a crash and potentially serious injury.

Free Fix

Your BMW dealer will update the camera software to ensure the back-up view is always visible when you're in reverse — and this repair is completely free.

Show original NHTSA language

Original — What Happened

BMW of North America, LLC (BMW) is recalling certain 2018 540d, 2018-2020 530i, 530i xDrive, 540i, 540i xDrive, M550i xDrive, M5, 530e, 530e xDrive, X3 sDrive, X3 xDrive, X3 M40i, X3 M, and 2019-2020 X4 xDrive, X4 M40i, X4 M, X7 xDrive, X7 M50i, 740Li, 740Li xDrive, 750Li, 750Li xDrive, 8 Series Convertible and Coupe 840i, 840i xDrive, M850i xDrive, X5 sDrive, X5 xDrive, X5 M50i, X6 xDrive, X6 M50i, 330i, 330i xDrive, M340i, M340i xDrive, Z4 sDrive, Z4 M40i, 740Le xDrive and 745Le xDrive, 2018-2019 640i xDrive Gran Turismo and Rolls-Royce Phantom, 2019 M850i xDrive Gran Coupe and Rolls-Royce Cullinan and 2020 Toyota Supra vehicles. The back-up camera and display settings can be adjusted such that the rear view image is no longer visible and the system will retain that setting the next time the vehicle is placed in reverse. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 111, "Rearview Mirrors."

Original — Risk if Unfixed

The lack of an image in the back-up camera display increases the risk of a crash.

Original — Remedy

BMW will notify owners, and dealers will update the back-up camera software, free of charge. The recall began November 8, 2019. Owners may contact BMW customer service at 1-800-525-7417 or Rolls-Royce at 1-877-877-3735. Toyota owners may contact Toyota customer service at 1-888-270-9371.

View full recall details → Repairs are free at any authorized dealer. Find a dealer →

Browse by Component

ENGINE AND ENGINE COOLING

1 recall

BACK OVER PREVENTION

1 recall

Other BMW 640i Years

2018 BMW 640i

Known Safety Recalls

ENGINE AND ENGINE COOLING:ENGINE

BACK OVER PREVENTION: SENSING SYSTEM: CAMERA

Browse by Component

Other BMW 640i Years

Related Pages